BLACK BOX FLIGHT MONITOR

Black Box Photo (small)This product is designed to help you keep you radio equipment in good working order and make flying safer. Use for pre-flight checks as well as continuous in flight monitoring. Standard and PC download versions available.


Check for poor electrical connections -

Transmitter, receiver and battery leads can be checked by gently shaking whilst switched on. Any lost signal to the servo will immediately be detected.
Check for interference when using electric motors -
Running electric motors can cause interference to receivers, especially when the receiver is powered from the same battery. Use the Flight Monitor to help detect any interference whilst the motor is running.
Check range before a flight -
Just walk away from your model with the transmitter on, no need to watch for control surface movement or get help, the flight monitor LEDS will indicate if the signal was lost, and how long it was lost for.
Warn of pre take off problems -
Use as a visual last minute check before take off, If the green LED is off, or any other LED is on, don’t take off. Check for loose/bad cables, low batteries (Tx and Rx), interference, other transmitters on same frequency, metal-metal contacts, vibration.
Monitor in flight signal quality -
During flight, the signal to the servo is continuously monitored. If any red LED is on when you have landed, check for loose/bad cables, low batteries (Tx and Rx), interference, other transmitters on same frequency, metal-metal contacts, vibration.
Flight monitor is compatible with most PPM/PCM systems.

This product is brought to you in conjunction with RJ Electronics.

Designed and manufacturered in the UK